Installation and Connection of Device

Connect the power supply and start the device. Connect the decoder SDI/DVI interface (DVI compatible with HDMI and VGA,need adaptor) to the display.

Network Connection and Configuration

First,connect the decoder’s Ethernet port to the switch or PC by using the network cable. Then,set up your PC’s IP address in the subnet of 192.168.1.0/24,and login the web page through http://192.168.1.168 (the default IP address of the Ethernet port is 192.168.1.168), and the default login user name/password is admin/admin. After login, set parameters such as IP/DNS of the Ethernet port in the "Network" menu.

Adding Video Sources

Login the web page, click ‘Add’ on the “Media” tab, fill in the corresponding parameters (RTSP/RTMP/HLS and other video sources) according to the video source information, and then confirm, you can add a video source.

Decoding output

The decoder has two output windows, select any output window and click the HDMI/SDI/VGA option to be green, which means that the window screen is output to the corresponding HDMI/SDI/VGA interface. Then drag the added video source to the output window and the decoder will start decoding it. If the decoding is normal, the video will be output.