Quick Reset and Reboot

“ Quick Reset” is only suitable for resetting video decoding function of the decoder. Due to video signal not stable, parameters setting wrong will make decoding functions abnormal; please try to execute “quick reset”. Please kindly wait for about 3s.

● “Quick Reset”, “Quick Reset” is only restoring configured decoding parameters, not changing default IP or other configured parameters;

● “Reboot”, is used for executing ‘warmr’ eboot. When “quick reset” couldn’t solve problems, please try “Reboot”. The whole process will last around one minute;

● Under some circumstances, reboot may be with the help of ‘cold’ reboot: power down then power up the device.

NOTE: It is not suggested to use the way of ‘cold’ reboot quite often, as it may cause bad >influence on device hardware and software.