Installation and Connection of Device
Connect the power supply correctly and start the device. Connect the decoder HDMI/SDI interface to the displayer as needed.

Network Connection and Configuration
First, connect the decoder’s Ethernet port 1 to the switch or PC by using the network cable. Then, set up your PC’s IP address in the subnet of 192.168.1.0/24, and login the web page through http://192.168.1.168 (the default IP address of the Ethernet port 1 is 192.168.1.168), and the default login user name/password is admin/admin. After login, set parameters such as IP/DNS of the Ethernet port in the "Network" menu.

Adding Video Sources
Login the web page, click “Add” on the "Media" menu, fill in the corresponding parameters (RTSP/RTMP/HLS and other video sources) according to the video source information, click confirm, and you can add a video source.

Decoding output
The decoder has two output windows, select any output window and click the HDMI/SDI option to be green, which means that the window stream is output to the corresponding HDMI/SDI interface. Then drag the added video source to the output window and the decoder will start decoding it. If the decoding is normal, the video will be output.