Restore Factory Settings

If the parameters are changed that lead the converter couldn’t work (The typical situation is that the network address was changed, so it couldn’t visit the device by network), users could restore factory setting to default value.

Two methods for restoring factory settings:

①Click ”System Settings>Restore factory settings” on the web console.

②Press “Reset” button at the bottom of the device

There is a reset button at the bottom of the device, hold the button for more than 5 seconds, the device will restore to factory settings. Restoring factory settings will lead to the restarting of the device. The restarting process takes about 30s.

Note:

These parameters will be restored to default value after restoring factory setting:

● Login username and password will be “admin”;

● IP address will be restored as 192.168.1.168, subnet mask will be 255.255.255.0;

● All encoding and decoding parameters of video and audio will be restored to default value;

● Media transmission parameters will be restored as default value.