Installation and Connection
Connect the power and video input source correctly, power on the device.

Network Connection and Configuration
The easiest way for network connection is to connect the device to the network by wire, automatically obtain the IP address and DNS from the network without any settings on the device. After that, use NewTek Studio Monitor and connect the NDI stream of the device, click the gear button( ) in the lower right corner of the software interface, you can directly open the login link of the encoder WEB page without manually entering the URL. (For the first login or the first login after restoring the factory settings, you will need to agree to the “EULA” that pops up. Otherwise, the NDI stream service of the device cannot be used normally.)
If you want to set the network manually, you can use the default IP address 192.168.1.168 to login the web page and set. The default username and password is “admin/admin”.

NDI Streaming
NDI has the function of automatic discovery. After the encoder is normally connected to the network, other NDI-supporting tools (such as Newtek studio monitor, OBS, vMix) can automatically discover the encoder and pull the NDI stream directly.

NDI Decoding
To find the NDI source in the same LAN and decode the corresponding source to the display.