Installation and connection of the device
Connect the power and video input source correctly, power on the device.

Network Connection and Configuration
The simplest way is that the encoder accesses the network or directly connected to the computer by wired mode, and logs on to the WEB page with the default device management IP address (192.168.1.168) for setting. The default user name and password are admin/admin.
In order to operate conveniently, wireless encoder can also connect WiFi hotspot configuration equipment with WiFi terminal.
If you use wireless network push flow, you need to login to the WEB page of the device to set up WiFi.

RTSP Pulling stream
Using a decoder or a PC player (such as VLC), it can pull the RTSP stream of the encoder directly.RTSP streaming services are continuously open.

Other streaming service
If necessary, you can also configure devices to push RTMP, UDP, HLS and other video streams at the same time