2. Home
  4. Docs
  6. REN-100 Video Encoding Card Quick Start Guide
  8. quick get start
  10. Device Working

Device Working

Video Source Checking

When there is no video signal input, the Motion JPEG stream displays a blue image. If the video input, there will be a real-time video displayed and changes every three seconds.
file

Note
If the video source connected, there is still a blue screen or video displayed abnormally. Please check the input video source,
the video resolution format or cables, etc.

Check Encoding Streams

Download the VLC
Download and install the VLC through the official address https://www.videolan.org/vlc/.
Please follow the official guidelines of VLC for download/installation.
VLC is a free, open source, cross-platform multimedia player and framework that can play
most of multimedia files as well as DVD, CD, VCD and various streaming protocols.

  1. Click the“Encoding and Stream”- “Encoding and Stream Settings”;
  2. In the H.264 main stream, copy the URL address of RTSP displayed on the right side of RTSP;
  3. Open “Media”- “Network Streaming” of VLC;
  4. Enter the URL address of RTSP in the network, and click the [play] button in the lower right corner;
  5. VLC will play the input video of device.

file

Website for more information about the RE100:
https://www.kiloview.com/en/support/docs

RTMP Live Streaming

First, add an RTMP push point on the device side. Click” Encoding and Stream”- “Encoding and Stream Settings” and then click” Add a Streaming Service” under the H.264 main stream, and select “RTMP Push” in the pop-up window. After confirmed, a push point is generated.
file

Take FACEBOOK as an example, first obtain the RTMP push URL on the live platform. Login to FACEBOOK, click “Live Video” to enter the live room, and click “Use Stream Key” for live broadcast. Fill in the URL of live broadcast and stream key into the URL address of the RTMP push point, and start the streaming service. You can see the video in the live broadcast room.

file

Introduction

  • If the platform RTMP streaming address and live broadcast code are separate, please use the symbol "/" to add the live broadcast code after the RTMP address. The format is: rtmp address/live code.
  • Please make sure the device is connected to the network, and configure the correct IP address, DNS and other parameters.

How can we help?