Set the Stream ID of the encoder
First, we open the web page of the encoder and add three streaming media services in the main stream options. Select SRT-TS push in Service Types. Then we set parameters and start the pushing service. Set Caller in the handshake mode, set the IP address at the receiving end, at the port set the corresponding listening port of the receiving end. The port number can be filled in from 1025 to 65535. Here, the port number of the three SRT streams can be set as 9001. The SRT stream ID can be set as abc1, streamkey2XJB and streamkey3YQV. After setting, click Save to open the SRT stream and start pushing.

SRTMiniServer pulls stream and decodes
Open SRTMiniServer, click on the localnet page, here we can find IP address and the port of the device, which can be corresponding filled in our encoders’ SRT streaming address and port. Let’s look downwards. There are 12 windows in total numbered #1-#12 respectively. Right beside is the Stream id. We now modify the Stream id of the first three windows to the same Stream id as the three SRT streams. After setting, click the start button on the right, connect the SRT stream. Click on the Preview button on the right side, and it will display the real-time picture of media streaming.